Post by Jim Weickum on Nov 19, 2023 12:08:02 GMT -7
2023-2024 Front Range Vintage Slot Car Rules
1. True Vintage - 1/24th Open Wheeled Cars
a. This will include cars made by Cox, Atlas, Testors, etc.
b. These cars will be made from 1965-1968.
c. The cars will have "stock" motors, no rewinds or "hopped up" motors. No 26D motors.
d. Bodies can be hard bodies, Lexan, or other light weight type of material as used in the 1960's.
e. Track width must remain within the guidelines established; 3.0 inches maximum. This will be the outside-to-outside measurement including tire sidewalls.
f. Guides to remain under the front of the body when viewed from above.
g. Tires and wheels may not be wider than 0.500 inches. This is the tire tread only.
g.1 Wheels may be plain, which may be painted. Using "knock offs" with plain wheels will be accepted for compliance.
h. Chassis may be stock, such as Cox, or can be made from a kit, such as Dynamic parts. Also, can be homemade, such as brass tubing. Please no "jail house" chassis.
i. Must include a driver in the car.
j. Must have numbers on the car, minimum of two, such as each side.
k. All other General Rules apply.
2. 1960's NASCAR
a. This class will include cars that raced from 1957-1971 in a NASCAR class. Superspeedway, dirt, paved oval or road course.
b. These cars will be from varies companies such as Carrera, Revell, Monogram, Pioneer, etc.
c. This will be a modified/open class.
d. Hard bodies only. May be a resin body. No Lexan or other light weight bodies.
e. Chassis will be open with the mounting of the body to not have any external parts, like screws or pins on the outside of the body. Slot.it HRS/HRS2 and 3D printed chassis are able to be used.
f. Motors limited to 23k for FC-130 style motors, short can. Motors limited to 22k for FK-180 style motors, long can. Motors limited to 25k for FF/FK-050 style motors, slim can. All ratings at 12
volts as standard.
g. Wheels limited to 15.8mm x 8.5mm. Tires are to be sized to fit the wheels and must not be a "low" profile tire. (Must be 20.5mm or taller tires, such as a stock tire on a Monogram car)
h. Interior may be cut down to fit, must have driver with open face helmet, with steering wheel and dash as a minimum. No Lexan or vacuum formed interiors. No paper card interiors.
i. All other General Rules apply.
3. Rolly Polly Cars
a. This class will be for small cars that handle like they need stabilizing wheels on the outside of the car. No wide flared fender cars.
b. Cars need to have a roof to get the maximum effect, no roadsters please. All tops must be up. Also, no "paper" roofs.
c. Motors should be limited to 18k.
d. Chassis may be stock or other; 3D printed or homemade are OK. Vintage chassis and motor may also be used.
e. All other General Rules apply.
The Rolly Polly Class may still have some changes, but these rules will give everyone an idea of what the rules may be. We have removed the skid pad timing from the rules. It was making it hard to have a car that could be used in the class. We are looking at a list of cars that may be suggested for this class to help with ideas. Remember all cars need to be "30 years old" to race in any class.
Here are a few cars that may work.
Revell - NSU
Scaley - E type
Spirit - BMW 2002/1600
Ninco - Porsche 356
Ninco - Austin Healey (not the wider cars like the 56 Corvette or Jag XK-120)
Revell GT-350
VW's - Bug or Van
SCX - Citroen
Vintage Revell -such as Austin Martin DB5
SCX - MGA
Revell - Ford Lotus Cortina/Ford Escort
Autoart -Jag D-type
anything - Renault
1. True Vintage - 1/24th Open Wheeled Cars
a. This will include cars made by Cox, Atlas, Testors, etc.
b. These cars will be made from 1965-1968.
c. The cars will have "stock" motors, no rewinds or "hopped up" motors. No 26D motors.
d. Bodies can be hard bodies, Lexan, or other light weight type of material as used in the 1960's.
e. Track width must remain within the guidelines established; 3.0 inches maximum. This will be the outside-to-outside measurement including tire sidewalls.
f. Guides to remain under the front of the body when viewed from above.
g. Tires and wheels may not be wider than 0.500 inches. This is the tire tread only.
g.1 Wheels may be plain, which may be painted. Using "knock offs" with plain wheels will be accepted for compliance.
h. Chassis may be stock, such as Cox, or can be made from a kit, such as Dynamic parts. Also, can be homemade, such as brass tubing. Please no "jail house" chassis.
i. Must include a driver in the car.
j. Must have numbers on the car, minimum of two, such as each side.
k. All other General Rules apply.
2. 1960's NASCAR
a. This class will include cars that raced from 1957-1971 in a NASCAR class. Superspeedway, dirt, paved oval or road course.
b. These cars will be from varies companies such as Carrera, Revell, Monogram, Pioneer, etc.
c. This will be a modified/open class.
d. Hard bodies only. May be a resin body. No Lexan or other light weight bodies.
e. Chassis will be open with the mounting of the body to not have any external parts, like screws or pins on the outside of the body. Slot.it HRS/HRS2 and 3D printed chassis are able to be used.
f. Motors limited to 23k for FC-130 style motors, short can. Motors limited to 22k for FK-180 style motors, long can. Motors limited to 25k for FF/FK-050 style motors, slim can. All ratings at 12
volts as standard.
g. Wheels limited to 15.8mm x 8.5mm. Tires are to be sized to fit the wheels and must not be a "low" profile tire. (Must be 20.5mm or taller tires, such as a stock tire on a Monogram car)
h. Interior may be cut down to fit, must have driver with open face helmet, with steering wheel and dash as a minimum. No Lexan or vacuum formed interiors. No paper card interiors.
i. All other General Rules apply.
3. Rolly Polly Cars
a. This class will be for small cars that handle like they need stabilizing wheels on the outside of the car. No wide flared fender cars.
b. Cars need to have a roof to get the maximum effect, no roadsters please. All tops must be up. Also, no "paper" roofs.
c. Motors should be limited to 18k.
d. Chassis may be stock or other; 3D printed or homemade are OK. Vintage chassis and motor may also be used.
e. All other General Rules apply.
The Rolly Polly Class may still have some changes, but these rules will give everyone an idea of what the rules may be. We have removed the skid pad timing from the rules. It was making it hard to have a car that could be used in the class. We are looking at a list of cars that may be suggested for this class to help with ideas. Remember all cars need to be "30 years old" to race in any class.
Here are a few cars that may work.
Revell - NSU
Scaley - E type
Spirit - BMW 2002/1600
Ninco - Porsche 356
Ninco - Austin Healey (not the wider cars like the 56 Corvette or Jag XK-120)
Revell GT-350
VW's - Bug or Van
SCX - Citroen
Vintage Revell -such as Austin Martin DB5
SCX - MGA
Revell - Ford Lotus Cortina/Ford Escort
Autoart -Jag D-type
anything - Renault